or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 01759 487838.
Installing your Cooker Hood
13
Installing your Freestanding Cooker
Bringing it all together
Mounting Instructions
● Drill five 8 mm diameter holes to a depth of 50 mm for the
attachments and press in the wall plugs flush with the wall.
Installation
● Screw on the fixing bracket for the flue duct.
● Screw on brackets for the extractor hood hand-tight. Do not firmly tighten
the screws.
Preparing the installation Caution!
Ensure that there are no electric wires, gas or water pipes in
the area where holes are to be made.
● Mark a vertical centre line on the wall from the ceiling to the lower edge of the
extractor hood.
● Mark positions for the screws and the contour of the attachment
To Next Page
Loading...
