Bush BFFF48144W - Trouble Shooting

11
Customer Helpline: 0845 600 4632
Trouble Shooting
If your refrigerator is not working properly, it may be a minor problem, therefore check the following.
IMPORTANT NOTES:
• In case of a sudden power loss or
disconnecting reconnecting of the plug to the
electrical socket, the compressor’s protective
thermal element will be opened as the
pressure of the gas in the cooling system of
your refrigerator has not yet been balanced.
4 or 5 minutes later, your refrigerator will start
to operate; this is normal.
• If you will not be using your refrigerator for a
long time (holiday, etc...), disconnect the plug
from the socket. Clean your refrigerator as per
page 10 of this document and leave the door
open to prevent any humidification or odour
formation.
If there is still a problem with your refrigerator
despite following the instructions in this book,
please consult your nearest authorized service
center, or call the customer help line on 0800
600 4632.
Problem Possible Causes Possible Solutions
The appliance does not
operate
There is a power failure
The mains plug is not properly
plugged in, or is loose
The socket is defective. To
check this, plug in a fully
operable appliance into the
same socket
The appliance performs poorly You have overloaded the
appliance
The doors are not closed
perfectly
There is not sufficient
ventilation around the
appliance
There is a noise The cooling gas which
circulates in the larder circuit
may make a slight noise
(bubbling sound) even when
t
h
e
c
o
m
p
r
e
ss
o
r
i
s
n
o
t
r
unn
i
n
g
.
Do not worry, this is quite
normal. If these sounds are
different check if;
· The appliance is installed
firmly as described in the
section of this instruction
manual
·
O
b
j
e
c
t
s
o
n
t
h
e
a
pp
l
i
a
n
c
e
a
r
e
vibrating
The life cycle of this product as determined and
proclaimed by the Ministry of Industry (the
period for making spare parts available for the
product to be able to fulfill its functions) is 10
years.
Conformity Information
• Normal Class is defined for the environment
temperatures between 16°C and 32°C in
accordance with the TS EN ISO 15502
Standards.
• The appliance is designed in compliance with
the EN15502, IEC60335-1 / IEC60335-2-24,
2004/108/EC standards.