5
Customer Helpline: 0845 600 4632
Before using the appliance
• Before switching on, place the appliance in
an upright position and wait at least three
hours without moving the appliance. This will
give the freezing circuit time to settle and
operate efficiently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
• Installation of the appliance and electrical
connections must be carried out by a
qualified technician in accordance with the
installation manual and local regulations.
• The procedure for installation the appliance
into the kitchen unit is given in the installation
section of this manual. This product is only
intended to be used in proper kitchen units.
• The appliance must be connected with a
properly installed fused socket. Power supply
(AC) and voltage at the operating point must
comply with the details on the name plate of
the appliance (the name plate is located on
the inside-left of the appliance).
• Insert the plug into a socket with an efficient
ground connection. If the socket has no
ground contact or the plug does not match,
we suggest you to call an authorised
electrician for assistance.
• The manufacturer is not responsible for failure
to complete the ground connection as
described in this booklet.
• There can be an odour when you first switch
on the appliance. It will disappear after the
appliance starts to cool.
• The plug must be accessible following
installation.
Switching on the appliance
To Next Page
Loading...
