Fig 3.
Getting to know your Bluetooth CD Boombox
You’ll be up and running in no time
Getting to know your Bluetooth CD Boombox
12
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Connection
Please consider carefully where your boombox will be situated and make sure that it is:
• on a flat and stable surface
• within 1.4 metres of a power socket
• where you can fully extend the wire radio aerial
• at least 1 metre away from other electrical appliances to avoid interference.
1. Connect the power cable to the back of the boombox.
2. Extend the wire radio aerial. A vertical position is recommended for maximum signal
strength.
3. Plug the mains power plug into the mains power wall socket and switch on (Fig3) .
The red power LED on the left of the display will light up.
.
To Next Page
Loading...
