Using your Bluetooth CD Boombox
Let’s get started
Using your Bluetooth CD Boombox
17
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Next button.
Back button.
• Fast forward within a track:
Press and hold the
• Fast backward within a track:
Press and hold the
• Stop:
Press and release the Stop button.
• Repeat:
Press and release the Repeat button,
the current track will be repeated.
Press the Repeat button again to repeat all of the tracks on the CD.
Continuously press and release the Repeat button to cycle through the available
Programmed play mode
In programmed play mode, you can programme the play order of the tracks on your CD.
You can program up to 20 tracks in total.
1. In CD mode, with the CD you wish to programme in the CD compartment and
stopped, press and release the Program button.
2. Use the Back or Next buttons to go to the track number that you would like to program
to play first. Press and release the Program button to confirm.
3. you can use the Back or Next buttons to select the second track. Continue to select
each track as in Step 2 above, up to a total of 20 tracks. Press and release the Program
button again to confirm the last track in the
programmed play mode list.
4. Press and release the Play button to play the programmed tracks.
5. To exit programmed play mode, press and release the Stop button twice.
To Next Page
Loading...
