Functions
Simple everyday use
Functions26
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
3. Select the desired
cooking time period using
the “+” and “-” keys.
4. The current time will
reappear on the screen, the
symbols “A”, and will
remain illuminated.
5. Press “MODE” until you
see “end” and symbol on
the screen. The time and the
symbols “A” and will flash.
6. Select the desired finishing
time using the “+” and “-”
keys.
7. Add the cooking period to
the current time of day. You
can set a time of up to 23
hours and 59 minutes after
this.
8. The current time will
reappear on the screen, and
the symbols “A”, and will
remain illuminated.
The operating
The operating time will be calculated and the oven will
automatically start so that cooking will finish at the set
finishing time. When the timer reaches zero, the oven
will switch off, an audible warning will sound and the
symbols “A” and
will flash. Turn both control knobs
to the “0” position and press any key to stop the sound.
The symbol will disappear and the timer will switch
back to manual function.
Sound Adjustment
To adjust the volume of the audible warning sound,
while the current time of day is displayed, press and
hold the “-” button for 1-2 seconds until an audible
signal sounds. After this, each time the “-” button is
pressed, a different signal will sound. There are three
different types of signal sounds. Select the desired
sound and do not press any other buttons. After a short
time, the selected sound will be saved.
To Next Page
Loading...
