Teletext Services (where available)
Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.
Digital Teletext
Press the Text button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may dier
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the Text button is pressed again, the TV returns to
television broadcast.
MHEG Teletext
With digital terrestrial broadcasting (DVB-T), in addition
to pictures and sound, you can also view digital teletext.
Digital teletext is sometimes broadcast at the same time
with the normal broadcasting.
•Press the Text or Red button
•The digital teletext information appears
•Operate it with the coloured buttons, directional buttons
and OK button
The operation method may dier depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen. Press the Text button
to return to television broadcast.
BBC Red Button+ (RB+)
While watching BBC channels, press the Red button or
Text button to access Red Button+ services provided by
the BBC. On the opening page you can access to BBC’s
main services such as BBC iPlayer, BBC News, BBC Sport
and many others. There are also links to the home pages
of the related applications available. Use the navigation
buttons on the TV’s remote control to move through the
application. Press Exit button to close and exit.
Software Upgrade
Your TV is capable of finding and updating the firmware
automatically via the broadcast signal or via Internet.
Software upgrade search via user
interface
On the main menu select Settings>System and then
More. Navigate to Software upgrade and press the OK
button. Then select Scan for upgrade and press OK
button to check for a new software upgrade.
If a new upgrade is found, it starts to download the upgrade.
After the download is completed, a warning will be
displayed, press OK button to complete software upgrade
process and restart TV.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock if
Automatic scanning option is set to Enabled and if the
TV is connected to an aerial signal or to Internet. If a new
software is found and downloaded successfully, it will be
installed at the next power on.
Note: Do not unplug the power cord while led is blinking
during the reboot process. If the TV fails to come on after
the upgrade, unplug, wait for two minutes then plug it
back in.
All updates are automatically controlled. If a manual
search is carried out and no software is found then this
is the current version.
Advanced features
Getting the most from your TV
Advanced features 25
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
To Next Page
Loading...
