Power Up Mode
This setting configures the power up mode preference. Last State and Standby Mode
options are available.
Virtual Remote Enable or disable the virtual remote feature.
OSS Displays Open Source Software licence information.
Application Priority
You can set your preference regarding the priority between the broadcast applications
and CICAM AppMMI applications using this option. In case a CICAM is inserted into the
TV and a contention occurs between the applications the priority will be given to the
selected type of application.
Dolby Notification
Sets the notification appearance preference for Dolby content. When set as On, Dolby
logo will be displayed on the screen when Dolby content is detected.
Note: Some
options may not be available depending on the model of your TV, its features and the selected country
in the First Time Installation.
Advanced features
Getting the most from your TV
Advanced features
38
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
