15
Using your DAB+/FM Radio
Let’s get started
Power source
General operation
Powering ON/OFF
∞
Press Standby button to switch the unit to ON mode.
∞
Press Standby button to switch the unit back to STANDBY mode.
∞
∞ When the unit is idle for approximately 15 minutes in Bluetooth mode, it will
automatically switch to standby.
∞ Please turn the unit o
completely to save energy when not in use.
Selecting modes
Press the Mode button to switch between Digital Radio, FM, Bluetooth modes.
Unwind the Type C cable to its full length. Connect the end of the cable to the DC IN Socket at
the rear of the unit and then connect to the mains adapter to the mains socket. The unit can
also run via the built-in 2000mah lithium battery.
When you first switch ON/OFF to ON, the display will show a clock image. If you can receive a
DAB signal in your location, the unit will synchronise to the current local time.
To Next Page
Loading...