17
Using your DAB+/FM Radio
Let’s get started
Equaliser
select a default sound format or configure your own.
During System settings mode, rotate the dial to select Equaliser and then press
the OK/Volume dial to confirm.
1. The equalizer options are: “Normal” – “Classic” – “Jazz” – “Pop” – “Rock” – “Speech” – “
My EQ”
If you want to personalise the sound settings rotate the dial to select "My EQ Setup" and
press the OK/Volume button to confirm. Select the levels of bass and treble you require
using the rotating dial and OK/Volume button to confirm, then press the Info/Back/Next
button to return to the Equaliser menu. In the Equaliser menu rotate the dial to select
"My EQ" and press the OK/Volume button to confirm.
Time/Date
1. Set Time/Date
The date are displayed as DD-MM-YYYY with the first value, mm, active (flashing).
Adjust each value with the dial control. As each value is set by pressing the OK/Volume dial
control, the next value becomes active ready for adjustment.
3. Set 12/24 Hour format
Allows you to change between 12 and 24 hour display.
4. Set Date Format
Allows you to change between DD-MM-YYYY to MM-DD-YYYY.
Backlight:
The display brightness can be configured to your choosing, including dimming the
brightness after a pre-determined time.
1. Select Timeout to determine if the display brightness dims after a length of time. Rotate
sec and press the OK/Volume dial to confirm.
2. Select On level to choose the display brightness during operation. Rotate the dial to select
from “High”, “Medium” or “Low” and press the OK/Volume dial to confirm.
3, Select Dim level to choose the display brightness after timeout. Rotate the dial to select
To Next Page
Loading...