If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
function is working, you must press Start/Pause button.
After adding/removing laundry, you must press Start/
Pause button again to activate delay timer function.
2- Spin Speed Selection
You can adjust the spin speed of your laundry with the
spin speed setting button.
When you select a new programme, the max. spin
speed of the programme you have selected shall be
displayed on the display panel. By pressing the spin
speed setting button, you can change the spin speed of
the selected programme between its max. value.
If you have skipped the spin speed you want to set,
you can re-switch to the revolution by keeping the
speed setting button pressed.
3- Extra Rinse
Select this function by pressing the Extra Rinse button
when the Extra Rinse indicator is displayed.
You may make the programme active by pressing the
extra rinsing auxiliary function button when the LED
light of the symbol turns on.
4- Pre-wash
You can expose your very dirty laundries to prewashing
operation prior to main washing by using this additional
function.
When using this function, you should put detergent in
front washing compartment of the detergent drawer.
Auxiliary
function
button 2
Auxiliary
function
button 3
Auxiliary
function
button 4
To Next Page
