What to do if my Bush WMSAE1012EW shows error E03?
If your Bush Washer displays error code E03, it indicates that the pump has failed or the pump filter is obstructed. You should clean the pump filter. If the problem continues after cleaning, contact an authorized service agent immediately.
Why does my Bush Washer show error E02?
Error E02 on your Bush Washer means the water level is below the heater, possibly due to low water pressure or a blocked water supply. Fully turn on the tap. If the issue remains, the machine will stop automatically. Unplug the machine, turn off the tap, and then contact an authorized service agent.
What to do if my Bush Washer has excessive amount of water (Error E04)?
If your Bush Washer has an excessive amount of water, indicated by error E04, the machine will discharge water by itself. Turn off and unplug the machine, then contact an authorized service agent.
How to fix Wash E01 Rinse error on Bush WMSAE1012EW?
The Wash E01 Rinse error on your Bush Washer indicates that the door is not shut properly. Ensure the door is fully closed until you hear a click. If the problem persists, turn off the machine, unplug it, and contact an authorized service agent immediately.
Essential safety guidelines to follow before operating the washing machine.
Important safety rules to adhere to while the washing machine is in operation.
Instructions for safely unpacking the machine and removing transit bolts.
Guidance on how to adjust the washing machine's feet for stability and efficient operation.
Step-by-step guide for connecting the water inlet and drain hoses correctly.
Crucial safety information and requirements for electrical connections to the washing machine.
Instructions for replacing the power plug, including wiring details and safety advice.
Guidance on sorting, preparing, and loading laundry into the washing machine.
How to correctly add detergent and softener based on laundry type and load.
Guide to identifying and resolving common problems with the washing machine.
Resolving issues related to poor washing results, foam, and stains on clothes.
Explanation of error codes displayed by the machine and the corresponding solutions.
General| Load Type | Front Load |
|---|---|
| Washing Capacity | 10 kg |
| Spin Speed | 1200 rpm |
| Energy Rating | A+++ |
| Color | White |
| Number of Programs | 15 |
| Noise Level (Wash/Spin) | 58 dB / 78 dB |
| Display Type | LED |
| Drum Material | Stainless Steel |
| Water Consumption | 52 L/cycle |
To Next Page
