What to do if my Bush WMSAE812EW displays error E03?
If your Bush Washer displays error code E03, it indicates that the pump has failed or the pump filter is obstructed. You should clean the pump filter. If the problem continues after cleaning, contact an authorized service agent for assistance.
What to do if my Bush Washer displays error E02?
If your Bush Washer displays error E02, it means the water level in your machine is below the heater. This could be due to low water pressure or a blocked water supply. First, ensure the water supply is turned on. If the issue persists, unplug the machine, turn off the tap, and then contact an authorized service agent.
What to do if my Bush WMSAE812EW displays Wash E01 Rinse?
If your Bush Washer displays 'Wash E01 Rinse', it means the door is not shut properly. Make sure to shut the door properly until you hear a click. If the problem continues, turn off the machine, unplug it, and contact an authorized service agent immediately.
What to do if my Bush Washer displays error E04?
If your Bush Washer displays error E04, it indicates that the machine has an excessive amount of water. The machine will discharge the water by itself. After it has discharged the water, turn off the machine, unplug it, and then contact an authorized service agent.
Important safety instructions to follow before operating the washing machine.
Crucial safety guidelines for operating the washing machine safely and preventing hazards.
Instructions for safely unpacking the machine and removing transit bolts.
Steps for correctly connecting the water inlet hose to the machine and water supply.
Guidelines for correctly positioning the drain hose for effective water drainage.
Important safety and connection requirements for the washing machine's electrical supply.
Common washing machine failures and their solutions for self-help.
Explanation of error codes and the processes to follow for each issue.
To Next Page
General
