Functions
Simple everyday use
Functions20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
2- Spin Speed Selection
You can adjust the spin speed of your laundry with the
spin speed setting button.
To adjust the spin speed between the maximum spin
speed and the cancel spinning option (- - -), press the
Spin speed button until the desired speed is displayed.
If you have skipped the spin speed you want to set,
keep pressing the spin speed adjustment button until
the desired spin speed is displayed again.
Auxiliary
function
button 1
3- Delay Timer
Auxiliary
function
button 3
You can use this auxiliary function to delay the start
time of the washing cycle for 1 to 23 hours .
To use the delay function:
• Press the delay key once.
• “01h” will be displayed. will light up on the
electronic display.
• Press the delay key until you reach the time after
which you want the machine to start the washing
cycle.
• If you have skipped the delay time you would like to
set, you can keep pressing the delay key until you
reach that time again.
• To use the time delay function, you need to press
the Start/Pause key to start the machine.
• If you want to cancel the delay:
- If you have pressed the Start/Pause key to start
the machine, you just need to press the delay
key once. will go off on the electronic display.
- If you have not pressed the Start/Pause key,
press the delay key continuously until goes
off on the electronic display. will go off on the
electronic display.
NOTE: In the case that you want to select the auxiliary
function feature, if the auxiliary function LED is not on,
this means that this feature is not being used in the
washing programme you have selected.
To Next Page
Loading...
