Functions
Simple everyday use
Functions24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
You can use softeners in all programmes (except spinning and draining programmes) optionally. When you arrange the quantity
of the softener, comply with the warning of the softener producer. Fill your softener in the (softener) compartment of the
detergent drawer..
NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT
TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
(*) Washing water temperature of the programme is the factory default.
Due to the short washing time of this programme, we recommend that less detergent is used. The programme may last
longer than 15 minutes if your machine detects an uneven load. You can open the door of your machine 2 minutes after the
completion of a washing operation. (The 2 minute period is not included in the programme duration).
According to regulation 1015/2010 and 1061/2010, the programme 1 and the programme 2 are respectively the ‘Standard 60°C
cotton programme’ and the ‘Standard 40°C cotton programme’.
The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together
in the same cycle, and that this programme is used to assess the compiance with the EU ecodesign legislation.
To Next Page
Loading...
