What to do if my Bush WMSAE612W Washer shows error E03?
If your Bush Washer displays error code E03, it means that the pump has failed or the pump filter is obstructed. To resolve this, try cleaning the pump filter. If the problem continues, it is recommended to contact an authorized service agent immediately.
Why does my Bush WMSAE612W Washer show error E02?
If your Bush Washer displays error code E02, it indicates that the water level in your machine is below the heater. This may be due to low water supply pressure or a blockage in the water supply. Ensure the tap is fully open. If the issue continues, the machine will automatically stop. Unplug and turn off your machine, then contact an authorized service agent immediately.
How to fix Wash E01 Rinse error in Bush Washer?
If your Bush Washer displays 'Wash E01 Rinse', it means the door isn't closed correctly. Make sure the door is firmly shut until you hear a click. If the problem persists, turn off the machine, unplug it, and contact an authorized service agent immediately.
General| Colour | White |
|---|---|
| Load Capacity | 6 kg |
| Spin Speed | 1200 rpm |
| Number of Programs | 15 |
| Energy Rating | A |
To Next Page
