2
Thank you for purchasing your new
WARNING: As with any laser device, it is not recommended to directly view the emissions for long
periods of time with magni ed lenses.
INTRODUCTION
*Note: You will get both longer and shorter maximum distances depending on the refl ective properties of the particular target
and the environmental conditions at the time the distance of an object is being measured. The color, surface nish, size and
shape of the target all affect refl ectivity and range. The brighter the color, the longer the range. White is highly refl ective, for
example, and allows longer ranges than the color black, which is the least refl ective color. A shiny nish provides more range
than a dull one. A small target is more dif cult to range than a larger target. The angle to the target also has an effect. Shooting
to a target at a 90 degree angle (where the target surface is perpendicular to the fl ight path of the emitted energy pulses)
provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g.
the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s
maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.
HOW OUR DIGITAL TECHNOLOGY WORKS
BATTERY ACTIVATION / BATTERY LIFE INDICATOR
Before first use: Remove the battery compartment cover by lifting the battery
NOTE: It is recommended that the CR2 3-volt lithium battery
be replaced at least once every 12 months. Insert it into the compartment
negative end first.
ENGLISH
PARTS GUIDE
BATTERY COMPARTMENT
COVER (see photo below)
STRAP LUG
POWER/FIRE BUTTON
MONOCULAR EYEPIECE
(w/diopter function )
MONOCULAR OBJECTIVE LENS
LASER TRANSMIT/RECEIVE
LENSES
MODE BUTTON
To Next Page
Loading...
