Need help?Do you have a question about the Bushnell FUSION X and is the answer not in the manual?
General| Magnification | 10x |
|---|---|
| Objective Lens Diameter | 42mm |
| Waterproof | Yes |
| Field of View | 305 ft @ 1000 yds |
| Eye Relief | 16mm |
| Exit Pupil | 4.2mm |
| Fogproof | Yes |
| Battery Type | CR2 |
| Lens Coating | Fully Multi-Coated |
| Prism System | Roof |
| Rangefinder Accuracy | +/- 1 yard |
| Display | LCD |
| Angle Compensation | Yes |
| Scan Mode | Yes |
| Reflective Target Mode | Yes |
| Rangefinder Range | 5-1760 yards |
Never look directly at the sun with your ranging binocular; it can cause serious eye damage.
Remove protective disc and replace battery cover. Use CR2 3-volt lithium battery.
Press Power/Fire button to activate display. Aim at target, press/hold Fire button for range.
Adjust eyecups/IPD first, then use center focus knob and right eyecup diopter ring for sharp vision.
Instructions on entering and navigating the Setup Menu to select ARC Mode and distance units.
Explains how ARC compensates for uphill/downhill angles to provide true horizontal distance.
Details Regular Mode, Bow Mode, and Rifle Mode for different hunting applications.
Calculates bullet drop/holdover based on distance, angle, caliber, and ammunition.
Guide to choosing the correct ballistic group based on caliber and load for accurate calculations.
Steps to resolve issues where the display does not illuminate.
To Next Page