Need help?Do you have a question about the Bushnell Imageview 11-1025 and is the answer not in the manual?
General| Magnification | 10x |
|---|---|
| Objective Lens Diameter | 25mm |
| Field of View | 300 ft @ 1000 yds |
| Prism Type | Roof |
| Exit Pupil | 2.5mm |
| Eye Relief | 10mm |
| Waterproof | No |
| Fogproof | No |
| Tripod Adaptable | No |
| Included Accessories | Carrying Case, Neck Strap |
| Dimensions | 4.5 x 4.5 x 2.5 inches |
Install batteries and SD card; camera requires an SD card to operate.
Power on/off, taking photos/videos, using tripod with remote.
Set camera date and time via MODE and SNAP buttons.
Briefly press MODE to cycle through modes for video, delete, etc.
Configure video, image quality, and photo resolution settings.
Line frequency, continuous shooting, memory access, delete, format, self-timer.
Connect as USB Mass Storage; lists compatible OS and USB port requirements.
Connect camera, access files via "DCIM", copy to hard drive.
Safely disconnect camera after transfer, then edit files on computer.
Adjust IPD and focus/diopter for clear viewing.
Use eyecups properly; avoid damage, store cool/dry, remove batteries.
Blow dust, use soft cloth for prints, or lens tissue/fluid for thorough cleaning.
Details warranty, required items, and addresses for returns.
Equipment tested for Class B limits, provides guidelines to correct interference.
To Next Page