11
USING THE SETTINGS MODE
1. Highlight SETTINGS (if you are in PLAY
GOLF mode, press MENU and select
EXIT ROUND to go to the main menu)
and press SELECT.
2. Select item from menu using UP/
DOWN buttons to highlight it, then
press SELECT button.
3. If multiple options are available for a setting, use UP/
DOWN to highlight your choice, then press select.
4. A dot in a checkbox to the left of a setting indicates the
current setting (to change it, highlight a dierent setting
and press SELECT).
5. Press MENU button to return to previous menu screen.
SETTINGS MENU ITEMS
• BATTERY*: press SELECT button to see battery condition
(charge %). (*also provided in the PLAY GOLF Menu)
• YARD/METER*: press SELECT. Dot in checkbox indicates
current setting (default=YARDS). To change how distances
are displayed, highlight YARDS or METERS, press select.
(*also provided in the PLAY GOLF Menu)
• AUTO OFF: press SELECT. Dot in checkbox
indicates current setting (default=OFF).
ON=unit will automatically power o
after 30 minutes if no buttons have been
pressed (or if unit has not auto advanced
to next hole as you walk the course).
OFF=unit will stay powered on until
user manually powers o by holding PWR button. To change
setting, highlight ON or OFF, press SELECT.
NOTE: selecting “ON” can help avoid running down the
battery charge if you forget to power o after a round-but
there is the possibility of losing GPS satellite contact, along
with all data generated since your start of play. “OFF” is the
normally recommended setting. Use “ON” with caution.
To Next Page
Loading...
Need help?
General
