9
About TOUR V4 SHIFT with Slope Technology
The advanced and patented slope technology found on the Tour V4
™
Shift features a built-in accelerometer-
based inclinometer that digitally displays the exact slope angle from -20 to +20 degrees of elevation. The
Tour V4 Shift will automatically compute an angle compensated range based upon distance and slope angle
determined by the laser rangender and built-in inclinometer. This data is then combined with internal
algorithmic formulas dealing with average club use and ball trajectories. The angle compensated range
provides direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline).
HOW TO USE SLOPE +/
™
The Tour V4 Shift makes changing in and out of slope easier than ever.
To utilize the slope function, simply slide the Tour V4 Shift logo so that
“Slope Edition” is visible. To make the device conforming again, simply
move the logo down.
OBTAINING SLOPE YARDAGES +/
Once in “Slope” mode, simply hold the POWER button down while
holding the aiming circle on the ag and keeping the unit as steady
as possible. Once the distance is displayed, release the POWER button.
Once you have released the power button, a degree of angle and
compensated range will be displayed.
SLOPE OFF
SLOPE ON
To Next Page
Loading...
Need help?
General
