What to do if my Business Source Laminator pouch is jammed?
If a Business Source Laminator pouch is jammed, press the reverse switch. This will cause the pouch to exit from the front of the machine.
Why doesn't the motor work on my Business Source Laminator?
If the motor of your Business Source Laminator does not work, first check to ensure the machine is properly plugged in. Then, check to ensure that the power button is turned on.
General| Brand | Business Source |
|---|---|
| Model | 20875 |
| Category | Laminator |
| Language | English |
Explains the machine's ability to handle both hot and cold lamination.
Details individual settings for different film thicknesses (3-7 mil).
Describes the green light indicating optimal temperature for lamination.
Highlights the laminating speed of up to 14.4 inches per minute.
Notes the automatic shutdown after one hour of non-use.
Step-by-step guide for using the hot lamination function.
Step-by-step guide for using the cold lamination function.
Troubleshooting steps for a non-functional motor.
Ensuring pouches laminate correctly and addressing issues.
Procedure to clear a jammed pouch from the machine.
To Next Page
