To Next PageTo Next Page
Need help?Do you have a question about the Butler SPEED32HPR and is the answer not in the manual?
This document describes the Butler SPEED32HPR, SPEED32HP, SPEED32SP, and SPEED32L wheel aligners, which are advanced 3D systems designed for precise vehicle alignment measurements. These systems are equipped with two axles and pitches from 1800 mm to 4700 mm, and with track between 1200 mm and 2600 mm, making them suitable for a wide range of cars and vans, including small, medium, and long wheelbase vehicles. The core function of these devices is to accurately measure and adjust various alignment parameters such as total toe, front camber, caster, king pin, incl. angle, rear camber, and thrust angle.
The SPEED32 series wheel aligners utilize 3D technology with two Megapixel cameras per measuring head to capture images of the targets positioned on the wheels. These cameras are equipped with infrared emitting LEDs, which act as illuminators for the 3D targets positioned on the wheels of the vehicle. The system communicates wirelessly via Bluetooth, ensuring flexibility in the workshop environment. The software, running on an integrated management PC, processes the images to determine the alignment values. The system supports various operational modes, including preliminary operations, measurement preparation, vehicle data adjustment, and diagnostic functions. It also features a "ProView" vehicle search mode, allowing users to select vehicles by model, engine code, or type of suspension, and a "Shoot & Go" function for quick measurements based on license plate recognition.
The management PC, located inside the cabinet, is a key component of the system. It features a processor with a minimum of 2.00 GHz, 4 GB RAM, and a 500 GB hard disk. Connectivity options include 6 USB ports, 2 LAN Ethernet ports (10/100/1000 Mb), and integrated Windows 10 IoT™ operating system. The screen resolution is 1366x768 Pixels HD Ready. The system is powered by a 220/240 Vac single-phase 50/60Hz supply, with a maximum absorbed power of 500W. The measuring heads are equipped with long-lasting 12V rechargeable batteries, which are recharged when they are inserted in the charging support located on the cabinet. The battery status is displayed on the screen, indicating the remaining charge level. The system includes a 22" 16/9 high definition colour monitor for displaying measurements and program interfaces.
Precision measuring ranges for the SPEED32HPR/SPEED32HP models are:
For the SPEED32SP/SPEED32L models, the precision measuring ranges are:
The system also includes a colour inkjet printer for A4 size sheets, with the printer located in the central compartment for printer housing.
The wheel aligners are designed for ease of use, with a 102-key PC-type control keypad and a detector keypad for interacting with the software. The system allows for various adjustments, including steering wheel adjustment, rear axle adjustment, and front axle adjustment. The "Jack-Hold" procedure facilitates adjustments with wheels raised. The software provides a comprehensive database of vehicle models, allowing users to select the correct vehicle for precise measurements. The "ProView" search mode enables selection by model, engine code, or type of suspension, while the "Shoot & Go" function uses license plate recognition for quick data entry.
The system guides the user through the measurement process, from preliminary operations to final adjustments. It includes features like run-out procedure with automatic acquisition, which compensates for any inaccuracy of the rims and clamps. The software displays real-time measurement values and graphical representations of the alignment parameters, making it easy for technicians to visualize and correct any discrepancies. The system also supports various diagnostic functions, including chassis diagnosis and test drive procedures.
Regular maintenance is crucial for the optimal performance of the wheel aligner. The manual emphasizes the importance of keeping the work environment clean and dry, away from aggressive agents. Cleaning the equipment with jets of water and compressed air is not recommended. Instead, clean plastic panels or shelves using a damp cloth (in any case avoid liquids containing solvents).
The system includes a SMART CARD for program and database protection. This card, inserted into a reader, enables the program to function and access the vehicle database. In case of removal or replacement of the SMARTCARD, the program displays an error message.
The manual provides a troubleshooting section with common problems and their solutions, such as "No voltage in the network," "No power supply," and "The printer does not work." It also outlines general safety precautions, including the importance of qualified personnel for installation and maintenance, and the use of original spare parts.
For long-term storage, it is necessary to disconnect the power source and protect the display from damage due to excessive dust. Greasing the parts that could be damaged in case of dry-running is also recommended. When scrapping the device, it must be made inoperative by eliminating the connection cables and sensitive parts that may become a source of danger. The materials used in the device are recyclable and should be disposed of according to local laws.
The system also supports saving test results and customer data, which can be retrieved and printed as needed. This feature is particularly useful for tracking vehicle history and providing detailed reports to customers.
General| Brand | Butler |
|---|---|
| Model | SPEED32HPR |
| Category | Wheel Balancers |
| Language | English |
