8
Technical specifications
Supply voltage 8 V DC
Power (stand-by) 16 W
Power (max) 16 W
Power consumption 0,4 kWh/h (average)
Dimensions 191 x 125 x 132 mm
Weight 1,5 kg
Factory reset
If the Buttercup cooling or scale function are not functioning as desired, you can always
go back to the factory settings. Press and hold the Start button (1) for 10 seconds to re-
set Buttercup to its factory cooling setting and zero the scale. Buttercup indicates that
the factory reset is done by blinking all of the LED indicators.
Status indicators
The two status indicators on the short side of Buttercup can be used for troubleshoot-
ing. Buttercup gives the following indication signals (table below).
Yellow LED lit Buttercup is in scale mode
Blue LED lit Buttercup is in cooling mode
Blue LED blinking Buttercup confirms the selected temperature
Both blue and yellow
LEDs blinking
Buttercup confirms that it has been
reset to factory settings
To Next Page
Loading...