Moves your bricks. Fast. 44 UG_1.6 © 2021 BuWizz
BuWizz is visible in the app, but will not connect
1. Make sure your
device is not outside
the Bluetooth range -
suggested range for
detection of BuWizz is
under 5 meters
2. Turn off BuWizz for 3
seconds and try
reconnecting
3. Restart the BuWizz
app
4. In case the problem
persists, contact
technical support
My model loses connection when accelerating, braking or
reversing in high speed/ludicrous mode
1. BuWizz's internal
overcurrent protection
is tripping due to the
current spikes due to
the fast speed changes
2. Do not connect more
than 2x XL, 2x L, 2x M
or 1x RC or 1x BuWizz
motor per output
3. Use Ramp functions
to set long enough
ramp-up time
4. Make sure to control
motors carefully,
avoiding quick speed
changes and reversals
of the power sliders.
5. In cases where swift
control and reversals of
motors are needed, use
Slow or Normal mode.
6. Run several BuWizz
bricks in parallel to
increase number of
motors running in
parallel for huge
models.
App connects to BuWizz, but after a while model
stops responding
1. BuWizz will stop
responding if the model
leaves the range - for
best performance keep
your model with 15
meters of range
2. Battery is empty -
recharge BuWizz
3.Under heavy load and
drained battery, BuWizz
will reset itself and
terminate connection -
recharge BuWizz
BuWizz stops responding when control device has not been
used for a while
1. Check that BuWizz is
still turned on (BuWizz
turns off automatically
if no commands are
received for 10
minutes)
2. Exit the control
profile and reconnect to
BuWizz
3. In case of connection
issues restart BuWizz or
the app
LEGO®, MINDSTORMS®, DUPLO® are trademarks of The LEGO Group, which does not sponsor, authorize or endorse us in any way.
All Trademarks are property of their respective owners.
To Previous Page
Loading...
