BUXTON BTW 4600 - Putting into Operation

EN 8
Beforerstuse,besuretoreadthesafety
instructionscontainedinthisuser'smanual
carefully.
Beforeusingtheearphonesforthersttime,
removetheprotectivelmfromthecharging
contactsonthebottomoftheearphones
andreturnthemtothechargingcase.Start
chargingthechargingcaseandtheearphones
tothemaximumlevel.
Turning on the earphones –Takingthe
earphonesoutofthecasewillautomatically
switchthemon.Iftheearphonesareturnedo󰀨
outsidethechargingcase,pressandholdthe
touchpadoneachearphoneandwaitforthe
“BUXTON”greeting.
Turningo󰀨theearphones–Inserting
theearphonesintothechargingcasewill
automaticallyturnthemo󰀨.Theycanalso
beturnedo󰀨bylongpressingandholding
thetouchpaduntilthe“SEEYOU”message
appearsinunpairedmode.
Putting into operation