Why does BW Technologies Other charging indicator still indicates that the battery has not finished charging?
If your detector has been charging for more than 3 hours and the charging indicator still isn't showing a full charge, it's likely that the battery is trickle charging, meaning it's already full and ready to use.
General| Brand | BW Technologies |
|---|---|
| Model | GasAlertMicroClip Series |
| Category | Other |
| Language | English |
Provides contact information for technical support, sales, and general inquiries.
Covers critical safety warnings and usage guidelines to prevent hazards.
Explains the meaning of various international symbols found on the detector and in the manual.
Identifies physical parts of the detector as shown in Figure 1 and Table 3.
Details the various indicators and readouts on the detector's LCD screen (Figure 2, Table 4).
Explains the functions of the detector's pushbutton for various operations (Table 5).
Guides on turning the detector on, performing self-tests, and battery checks.
Describes the sensor testing process and display of alarm setpoints.
Covers automatic zero/O2 calibration, calibration due dates, and bump test procedures.
Introduces the various configurable options available for the detector.
Explains how to properly turn off the detector.
Guides on setting up startup messages, sensor configurations, and language preferences.
Details on adjusting alarm setpoints, intervals, and viewing gas exposure data.
Explains features like confidence beep, latching alarms, and stealth modes for customized operation.
Explains the different alarm conditions and their visual/audible signals (Table 6).
Defines TWA, STEL, and Maximum (peak) gas exposure measurements (Table 7).
Details alarm setpoints and how to reset them, including factory settings.
Provides essential guidelines, recommended gas mixtures, and preparation steps for calibration.
Step-by-step instructions for auto-zero and auto-span calibration processes.
How to verify calibration accuracy and manage calibration due date reminders.
Covers basic maintenance like cleaning, charging, and logging events.
Detailed instructions for safely replacing detector sensors and filters.
Offers solutions for various detector malfunctions and error messages (Table 12).
Lists available parts and accessories for ordering and replacement (Table 13).
Technical specifications including dimensions, weight, operating conditions, and datalogger details.
To Next Page