To Next PageTo Next Page
Need help?Do you have a question about the BWT Bewades 80W80/11N and is the answer not in the manual?
General| Brand | BWT |
|---|---|
| Model | Bewades 80W80/11N |
| Category | Industrial Equipment |
| Language | English |
General safety advice for product installation and operation.
Defines the applicability and intended audience of the manual.
Outlines required qualifications for installation and operation personnel.
Instructions for safe transport and mounting of the unit.
Explains hazard and information symbols used in the manual.
Explains the format and meaning of safety instructions and warnings.
Highlights safety instructions specific to product actions.
Lists optional accessories available for the Bewades UV units.
Lists available spare parts for the Bewades UV units.
Describes the primary purpose of the Bewades N UV disinfection unit.
Lists actions that constitute misuse of the system.
Manufacturer's liability disclaimer regarding improper use or modifications.
References related documents to be observed.
Explains the primary design parameters of the UV units.
General regulations and technical specifications for installation.
Requirements for the installation location and surrounding environment.
Specifies requirements for the water fed into the unit.
Details on the installation process, pipe materials, and filters.
Notes on pre-installation consultation and parameter setting for operation.
Provides a schematic diagram of the unit's installation.
Shows the wiring diagram for the UV-Control II.
Step-by-step instructions for installing the Bewades 80 W model.
Step-by-step instructions for installing larger Bewades models.
Procedure for cleaning the unit, including emitter casing and radiation chamber.
Detailed steps for cleaning the emitter casing tube for the 80W model.
Detailed steps for cleaning the emitter casing tube for larger models.
Instructions for replacing UV emitters, including service life and troubleshooting.
Steps for replacing the UV sensor and its components.
Procedure for replacing the sensor window and its O-ring.
Operator's duties regarding commissioning, operation, and decommissioning.
Recommended checks by the operator for water, flow, tightness, etc.
Specific inspection activities and their frequency as per EN 806-5.
Details on scheduled maintenance and wear part replacement.
Detailed dimensional drawings and tables for Bewades units.
Operating ranges and values for the 80W80/11N model.
Operating ranges and values for the 200W200/11N model.
Operating ranges and values for the 390W130/22N model.
Operating ranges and values for the 600W200/22N model.
Instructions for temporary shutdown and contact information.
Guidelines for permanent removal and material identification.
Information on proper disposal of the unit and its components.
