3
English
RC60 ROBOTIC POOL CLEANER
System overview
The robotic cleaner sweeps the pool oor and walls collecting dirt
and debris in its internal lters. This user manual explains how to
operate the robotic cleaner, including cleaning, maintenance and
storage procedures.
Robotic cleaner operation
After the robotic cleaner is placed in the pool and activated, it
operates according to its program. It moves along the oor and
walls of the pool, covering the entire area of the pool. When it has
nished its program, it remains inactive on the pool oor. Power will
automatically shut off. Note: It's not recommended to stop the pool
cleaner prior cycle end.
Note:The robotic cleaner climbs the wall at intervals according
to its internal program. Its ability to climb over stairs in swimming
pools is subject to stair geometry and material.
Operating conditions
The robotic cleaner is intended for use in residential swimming
pools only and in the following conditions: (1) Recommended
water temperature 13°C-35°C (55°F-95°F). (2) Water pH : 7.2 -
7.6 (3) Chlorine level: pool is maintained according to the pool
manufacturer’s instructions. (Recommended Chlorine level:
2-4 ppm) Note: Failure to maintain the pool according to the
recommended operating conditions could prevent the robotic
cleaner from functioning properly.
Introduction
Cart
Power
supply
Robotic
pool
cleaner
Components
To Next Page
Loading...
