Before installation, please brush off all
corrosive materials on the installation
surface with a wire brush. During
installation, the metal area on the
installation surfaces must be in well
contact with each other, or the wheel
bolts may get loose, which may cause
the tire falling off in driving.
Reinstall Wheel Bolts
7. Reinstall all wheel bolts
manually.
To reinstall bolts, please manually
tighten them with wedged end inward
first. Push the wheel backward and try
to further tighten the bolts manually.
Do not apply engine oil or
lubricant on the bolts, or they will
get loose, which may cause the
wheel detached and lead to
serious accident. 。 If there is
engine oil or lubricant on the
bolts or nuts, clean them
immediately.
To Next Page
Loading...
