display the following information in
cycle: Total Mileage (ODO) – Short
Mileage Odometer (TRIPA) – Short
Mileage Odometer (TRIP B) - Total
Mileage (ODO).
To reset a short mileage odometer,
switch the information displayed on
the screen to the reading of it firstly,
then press TRIP button for over 2
seconds and release the button after
it is reset to zero.
Tachometer
Tachometer displays the engine
speed in rpm (round per minute) by
multiply the reading by 1000. Make
gear shift according to the
tachometer reading can prevent
engine from over speed running.
Driving at over high engine speed will
lead to excessive wear of the engine
and higher fuel consumption.
Do not allow the pointer to enter
read area, which means the
engine may severely damaged.
To Next Page
Loading...
