Active Region
After an intelligent key is registered,
the access and starting engine
function is available in the active
region.
1 Access function active region –
some 0.7m m from the handle
microswitch of the front outer door. If
the key is too close to door handle or
window, the access function may not
be activated.
2 Starting engine function active
region – in carriage.
If the key is on instrument panel or
floor, or in trunk or glove box, the
starting engine function may not be
activated.
In the following cases, intelligent
access and engine starting function
may not work normally:
● When there are facilities nearby
which give out strong electromagnetic
wave, such as broadcast tower,
power plant, radio station and
telecommunication signal tower.
● When you take the intelligent key
together with mobile
telecommunication devices, such as a
two-way radio device or cell phone.
● When the intelligent key is touched
or covered by metal objects.
● When you operate the door handle
quickly.
● When the intelligent key is close to
door handle.
● When somebody else operates
wireless remote control function on a
car nearby.
● When the battery is depleted. (To
replace battery, please see ―Replace
Card-type Intelligent Key Battery‖
and ‖Replace Electronic Intelligent
Key Battery‖ in this Chapter.)
● When the intelligent key is near high
voltage devices or noise-generating
devices.
● When you take the intelligent key
together with a key for intelligent
access and engine starting system of
another car or other radio devices.
● The intelligent key may not work
normally even in the active region due
to your location or profile of the car.