BYD L3 AUTO - Page 36

BYD L3 AUTO Owner’s Manual
1-28 Keys and car door
1. Apply parking brake firmly.
2. Shut down all unwanted lights and
electrical devices.
3. AT: Shift gear shift lever to P or N
gear.
MT: shift gear shift lever to Neutral
gear.
4. Step brake pedal or clutch pedal to
the bottom.
NOTE
 Each starting attempt shall be
no more than 20 seconds, or it
will cause overheating of
engine or wires.
 Do not let cold engine run at
high speed.
 Check the engine immediately
if it has difficulty in starting or
stalls frequently.
(b) Start Engine
Button Starting Function
When an intelligent key is in the car,
press ―ENGINE START STOP‖ switch
to start engine.
Before starting, you shall follow
instructions in ―(a) Before Staring
Engine‖.
Normal Starting Steps
The engine can be started only when
an intelligent key is in the car.
When stepping on brake pedal or
clutch pedal, indicator on the
―ENGINE START STOP‖ switch will
turn green. Press ―ENGINE START
STOP‖ switch slowly to start the
engine.
If Engine Stops Working
Restart the engine in the normal
starting procedure.
NOTE
When there is grease on your
hands, do not touch “ENGINE
START STOP” switch.
WARNING
When “ENGINE START STOP”
switch fails in operation, stop
operating it immediately and
contact BYD service station.
When Engine Cannot Start
The engine cannot start in the
following cases:
 When press down ―ENGINE
START STOP‖ switch, if the key
position indicator of the
intelligent key system is on with
the buzzer giving out warning