BYD L3 AUTO - Page 77

BYD L3 AUTO Owner’s Manual
Instruments and Maintenance Indicators 1-69
resetting; press ―DISP‖
button for 2 seconds to
reset this item.
Time
adjustme
nt
The clock and date
adjustment is
increasing circulation
regulation.
Check
charging
system
This information
indicates that there is
fault with charging
system. Stop the car
immediately and
contact BYD service
station.
Check
brake
system
This information
indicates that brake
fluid level is low or
there is fault with
braking system. Stop
the car immediately
and contact BYD
service station.
Check
ABS
system
This information will be
displayed when there is
fault with ABS or
braking system.
Contact BYD service
station for a check
immediately.
(a) Braking System Warning Light
When ignition switch is at ON, the
indicator will be on in the following
cases:
● When Braking Fluid Level is
low…
Tips
When braking fluid level is low,
continued driving is dangerous.
The car shall be checked by BYD
service station in the following
cases.
● When ignition switch is at ON, the
light is not on even when the
parking brake is applied.
● When the parking brake is released,
even if ignition switch is turned on,
the light is not on.
During operation if the light is on
temporally it does not mean that there
is fault.
TIPS
If any of the following cases, park
the car in a safe place and contact
BYD service station immediately.
● When engine is running, even if
the parking brake is released,
the light remains on.
In this case the brake may be
abnormal, which means the
brake stopping distance is
longer. Step on the brake pedal
forcibly for emergency cut-off.
● Braking system warning light is
still on when ABS warning light
is on.
In this case, the anti-lock brake
system does not function and
the car will be extremely
unstable.
(b) Seat Belt Indicator
The light will remind the driver to
fasten seat belt.
When ignition switch is at ON or
START, if the driver’s seat belt is not
fastened, this indicator will be turned
on. The seat belt will remains on until