BYD L3 AUTO - Page 93

BYD L3 AUTO Owner’s Manual
Automobile Multimedia System 1-85
Troubleshooting for multimedia player
Failure
Reason
Solution
1
No poweror sound
1. The ignition switch is
not turned on.
2. The wire is not
connected properly.
3. The fuse breaks.
1. Turn the vehicle key to ―ACC‖
or ―ON‖.
2. Check the wire connection.
3. Change a fuse with specified
specification.
2
No sound with disk put in
1. The disk is put in
reversely.
2. The disk is dirty or
scratched seriously.
1. Put in the disk correctly.
2. Wipe the disk or change a
new one
3
Unstable sound caused
by vibration
1. Installation is infirm.
2. The disk is dirty or
scratched seriously.
1. Fix the machine with
installation parts.
2. Clean up the disk or change a
new one.
4
Can not store channels
and the preset broadcast
The battery line is
connected improperly.
Connect the cable to correct pole.
5
The noise sent by FM
stereophony and single
channel broadcast give
are too loud
The broadcasting station
is far away or the signal is
excessively weak.
Choose other broadcasting station
with stronger signal.
Using of multimedia
Refer to <User’s Manual of L3 Multimedia Syste