0906-A
Frequency Response: 20Hz – 20kHz, +0/-0.25dB
S/N Ratio: -103dB Headphone LOW/HI (Volume 50% max. power / A-weighted)
-110dB Headphone Balanced (Volume 50% max. power / A-weighted)
THD: 0.06% Headphone LOW/HI (1Vrms input / 0dBu output)
0.009% Headphone balanced (1Vrms input / 3dBu output)
0.03% Speaker 8 Ohm (2Vrms input / 10W output)
Rated power: 2 x 1.15W (32) Headphone LOW
2 x 0.25W(32) Headphone HI
2 x 4.7W(32) Headphone Balanced
2 x 13W(8) Speaker
Load impedance: 16 Ohm – 2k Ohm Headphone, 4 Ohm – 8 Ohm Speaker
Gain: HI / LOW (Selectable)
Input terminals: 1 x balanced XLR, 1 x unbalanced RCA
Headphone output: 1 x balanced XLR (0 Ohm)
(Impedance) 1 x 6.3mm Jack (10 Ohm) for best control
1 x 6.3mm Jack (120 Ohm) for sound tuning
Speaker output: 1 x Balanced
AC power Line: AC120V/230V, 50/60Hz (Specifi ed on rear panel)
Power consumption: 23W Headphone drive, max. 50W Speaker drive
Dimensions: Approx. 218(W) x 354(D) x 58(H) mm (Incl. knobs, terminals and legs)
Weight: Approx. 3.2kg
Accessories: AC power cord, Owner’s manual
Color: Silver
NOTE: Design and specifi cations are subject to change without notice.
NOTE: Illustrations on the owner’s manual may deviate from the actual unit due to design
improvements.
Specifi cations
To Previous Page
Loading...