TL3N User's Manual
5
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
● IF TH E TL 3 N S E E M S TO BE MALFUN C T I O N ING, CONTAC T
A QUALIFIED SERVICE STATION. DISCONTINUE USE OF ANY
MALFUCTIONING UNIT.
Handling Precautions
❶
Connecting Other Devices
Unplug the TL3N’s AC power cord from the outlet before connecting or
disconnecting other devices. Exercise caution when handling the AC power
cord. When disconnecting the AC cord from a socket, make sure you pull the
plug, and not the cord itself.
❷
Turning Power On/Off
Your system components should be turned on/off in the following order to
avoid generating noise from your speakers and damaging the speakers
themselves or other devices:
Turning power on: Turn on the TL3N’s power rst, before turning on the DA
converter or amplier connected to the TL3N.
Turning power off: Turn off the amplier’s power rst, before turning off the
TL3N.
❸
Optical Semiconductor Laser Pickup
The optical pickup is one of the important components that determine the
performance of a CD player. Never touch the optical lens of the pickup with
your ngers, etc. Close the CD door to keep the lens clean when not in use.
❹
CD Stabilizer
Only use the provided CD stabilizer with the TL3N. Commercially available
stabilizers may cause the unit to malfunction.
❺
Handle With Care
Avoid exerting excessive force on the cabinet, the switch, the knob, the CD
AC POWER CORD CONNECTION
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH THE BLADE WIDTH
OF THE PLUG TO THE SLOT WIDTH. THE PLUG MUST BE
FULLY INSERTED TO THE SLOT.
For CANADA
To Next Page
Loading...
