EasyManua.ls Logo

C.P. Electronics EBDSPIR-PRM - Technical Data; Dimensions; Supply Voltage; Maximum Load

C.P. Electronics EBDSPIR-PRM
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Technical data
Part numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel: + 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref: #WD493 Issue 4
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
EBDSPIR-PRM
DBB
Dimensions See diagrams opposite
Weight 0.15kg
Supply Voltage 230VAC +/- 10%
Frequency 50Hz
Maximum Load 10A of lighting and/or ventilation
including incandescent, fluorescent,
compact fluorescent, low voltage (by
switching the primary of transformer).
Power consumption On 875mW, Off 895mW
Terminal Capacity 2.5mm
2
Temperature EBDSPIR-PRM -10ºC to 35ºC
EBDSPIR-PRM-IP -10ºC to 35ºC
EBDSPIR-PRM-IP-LT30 -30ºC to 35ºC
Humidity 5 to 95% non-condensing
Material (casing) Flame retardant ABS and PC/ABS
Type Class 2
IP rating EBDSPIR-PRM IP40
EBDSPIR-PRM-IP IP55
EBDSPIR-PRM-IP-LT30 IP55
Compliance EMC-2004/108/EC
LVD-2006/95/EC
Part number Description
Detector
EBDSPIR-PRM Ceiling PIR presence detector
EBDSPIR-PRM-IP Ceiling PIR presence detector sealed to IP55
EBDSPIR-PRM-IP-LT30 Ceiling PIR presence detector sealed to IP55 -30ºC
Accessories
DBB Surface mounting box
UHS5 Programming IR handset
UNLCDHS Universal LCD IR handset