Width Height Depth
Call points/monitoring points 87mm 87mm 35mm
Infrared ceiling receivers 87mm 87mm 35mm
Overdoor lights (addressable and slave) 87mm 87mm 60mm
RF integrity transmitter plate 87mm 87mm 25mm
Displays/network splitters 146mm 87mm 35mm
Ceiling pulls 93
Ømm - 27mm
Infrared transmitters (main body) 45mm 115mm 25mm
Portable movement detectors 100mm 48mm 187mm
Pressure pads 93
Ømm - 22mm
Quantec controller (back box) 410mm 250mm 80mm
Quantec controller (lid) 439mm 274mm 7mm
Radio receivers 271mm 155mm 170mm
All single gang devices (87mm x 87mm) mount on 25mm single gang UK back boxes.
All double gang devices (146mm x 87mm) mount on 35mm double gang UK back boxes.
Quantec Controllers are designed to be surface mounted or, alternatively, semi-flush
mounted using the AFP385 bezel.
Radio receivers are designed to be surface mounted.
Ceiling pulls have four knockouts for 16mm square mini trunking and their backplate fits
BESA centres.
All quoted dimensions are approximate.
DEVICE DIMENSIONS
Approved Document No: DNSQ100101 Rev 6 • Page 14 of 16
To Next Page
Loading...
Need help?
General
