Need help?Do you have a question about the C-THERM TCi and is the answer not in the manual?
General| Measurement Principle | Modified Transient Plane Source (MTPS) |
|---|---|
| Temperature Range | -50°C to 200°C |
| Accuracy | ±5% |
| Repeatability | ±1% |
| Interface | USB |
| Power Supply | 100-240V AC, 50/60Hz |
| Measurement Type | Thermal Conductivity |
| Sample Types | Solids, Liquids, Powders, Pastes |
| Sample Size | 1mm thickness |
Discusses potential constraints and best practices for using the C-Therm TCi instrument.
Guides users through the initial setup process for the C-Therm TCi system.
Outlines the general steps for preparing and performing a test.
Guides users through the process of creating new user calibrations using a wizard.
Details the software installation process, including prerequisites and steps.
Details how to unlock factory and user calibrations using an authorization file.
Offers solutions for common problems encountered with the software and hardware.
Analyzes potential sources of error in effusivity and conductivity measurements.
To Next Page