CAB DUMPER 7 User Manual

Manuale di installazione e d’uso per automazione per porte sezionali e basculanti
Installation and user manual for sectional and tilt-up doors
Installations- und Gebrauchsanleitung für Sektional- und Schwingtorantrieb
Manuel d’installation et d’utilisation pour portes sectionnelles et basculantes
Manual de instalación y uso para la automatización de puertas seccionales y basculantes
Instrukcja instalacji i użytkowania zestawu automatyki do bram segmentowych i uchylnych
DUMPER 7
DUMPER 10
myone S.r.l - Via T. Edison, 11 - 30035 Mirano (VE) - ITALY Tel. +39 041 412542 - Fax +39 041 412542
www.myoneautomation.com
Manuale di installazione e manutenzione automazione
per porte sezionali e basculanti
IT
DUMPER
Manuale istruzioni
Operating instructions
Betriebsanleitung
Livret d’instructions
Manual de instrucciones
Książeczka z instrukcjami

CAB DUMPER 7 Specifications

General

Brand	CAB
Model	DUMPER 7
Category	Garage Door Opener
Language	English

Summary

DUMPER Automation System Setup

Product Overview and Dimensions

General information, features, and technical dimensions for the DUMPER automation system.

Installation Guide

Step-by-step instructions for installing the DUMPER automation system on sectional doors.

Electrical Connections and Configuration

DIP Switch Settings

Configure automation modes and functions using DIP switches.

Sensor Adjustment and Manual Operation

Adjust anti-crushing sensor sensitivity and perform manual door control.

Self-Teach Programming

Procedure for automated learning of door limits and operating speeds.

Transmitter Management and Accessories

Remote Transmitter Programming

Steps to program remote controls: memorizing, deleting, and resetting.

Optional Accessory Integration

Information on integrating optional accessories like adapters and battery kits.

Technical Specifications

User Handbook and Safety

Safety Rules and Warnings

Essential safety precautions, operating rules, and critical warnings for the system.

Operation and Maintenance

Guidelines for manual control, routine checks, and system maintenance.

Disposal and End-of-Life

Procedures for responsible dismantling and disposal of the product.