CAB FABY 2 - Tap Reassembly; Tap Pin and Spring Reassembly; Main Tap Pin and Handle Reassembly

Pic. 45
Pic. 43
Pic. 42
REASSEMBLY OF THE TAP
When inserting the main tap pin please
be careful that the little square hole (see
Pic. 43) is placed right in front of you.
Keep the tap pin pressed upwards until
you are able to see the square hole
where you will insert the handle (see
Pict. 44).
Insert the pin for handle fixing as
indicated in Pict. 45.
LUBRICATE
INSIDE
Before reassembling of the tap components lubricate the tap siege as
indicated in Pict. 41 and lubricate the seals as indicated in Pict.43. .
Pic. 41
HOLE
Insert the tap spring and tap pin as indicated in Pic. 41 and 42.
Pic. 44
10