FIX CLAMPS and HANDLE
Pic. 59
Pic. 60
A
B
Pic. 63
Pic. 61
NIGHT
DAY
LOCK FOR LID HOW TO FIX THE CLAMPS
Screw the small clumping plates on the outsides of the two bowls (see Pict. 56). Fix
clamps as shown in Pict. 59 & 60. Close the clamp with the lock .
HANDLE LOCK
Complete block
Partial block
Insert the handle lock from the lower
part of the tap (see Pict.61).
With the handle lock you have two
options :
(for ex. During the
night) Insert the handle lock as
indicated in Pict. 62 and close the little
lock ; In this way it is not possible to
open or remove any part of the tap;
therefore the dispensing of the slush is
not allowed.
(for During the day) Insert
the handle lock as shown in Pict. 63 .
And close the little lock;
In this way the dispensing of the slush is
allowed but, any removal of the tap parts
will be impossible.
Pic. 62
13