Why is my CabCAM Monitor picture so dark?
If your CabCAM Monitor is displaying a dark picture, first ensure that the brightness and contrast settings are correctly adjusted. Also, be aware that a low environmental temperature can affect picture quality.
What to do if my CabCAM Monitor has no picture?
If your CabCAM Monitor shows no picture, make sure the AV cable is properly connected.
How to fix an upside down picture on my CabCAM Monitor?
If your CabCAM Monitor displays an upside-down or laterally inverted picture, use the remote control's horizontal/vertical selection switch to set the proper orientation.
Why does my CabCAM Monitor have no picture and no sound?
If your CabCAM Monitor has no picture and no sound, it might be due to an improperly connected automobile adapter or the use of an unauthorized power supply. Also, check if the power switch is in the OFF position.
What to do if my CabCAM Monitor has no sound?
If your CabCAM Monitor has no sound, check whether the audio wire is properly connected, or if the sound volume is turned off or set too low.
Why isn't the reverse gear activating the screen on my CabCAM Monitor?
If the reverse gear doesn't activate the screen (no picture) on your CabCAM Monitor, the reversing trigger might be loose, meaning it's not well connected with the reverse light.
General| Screen Size | 7 inches |
|---|---|
| Number of Camera Inputs | 2 |
| Resolution | 800 x 480 |
| Aspect Ratio | 16:9 |
| Brightness | 400 cd/m² |
| Contrast Ratio | 500:1 |
| Response Time | 25 ms |
| Storage Temperature | -30°C to 80°C |
| Input Voltage | 12-24V DC |
| Operating Temperature | -20°C~70°C |
To Next Page
