CabCAM A-CDW7M1C - Menu; Mode Selection

~
10
~
8. Menu
● MENU is only allowed for operation under single image mode, not quad mode.
● Press MENU to display the following options and settings:
1. MODE
2. PICTURE
3. MIR-FLIP
4. RECORD
5. AUTOSCAN
6. SYSTEM
7. PLAY
8. PAIRING
(1) Press or to select MODE. Press OK to enter. Press or to select
SPLIT/QUAD mode. Select OFF to exit SPLIT/QUAD mode. Press MENU to return to
main menu.
Note:
When select OFF to exit split /quad mode, split/quad trigger display is disabled.
Monitor will switch to single image mode.