Need help?Do you have a question about the Cabela's OUTFITTER GEN3 and is the answer not in the manual?
Identifies key components on the front of the camera, including lens and PIR detector.
Details the camera's buttons, display screen, and control layout for operation.
Describes the battery bay, power port, mounting points, and attachment options.
Explains the functions of AIM, M, and OK buttons for camera setup and operation.
Provides critical instructions for SD card insertion, formatting, and compatibility.
Covers battery recommendations and the OFF, AIM, and ON camera modes.
Explains how to program the camera using AIM mode and navigate settings menus.
Explains how the camera saves media to an SD card using .JPEG and .avi formats.
Information on firmware, software versions, and restoring default settings.
Options for selecting camera language and setting the time and date.
Configuration for temperature units and PIR trigger delay intervals.
Instructions for formatting the SD card, including data backup warning.
Details settings for photo quality, multi-shot, detection sensitivity, and flash.
Details settings for video quality, length, detection sensitivity, and flash.
Details settings for time-lapse delay, detection sensitivity, and flash.
General| Power Source | 8 AA batteries |
|---|---|
| Video Resolution | 1080p |
| Detection Range | 100 feet |
| Recovery Time | 1 second |
| Flash Range | 100 feet |
To Next Page