Cabela's OUTFITTER GEN3 - Camera Operations; Battery and Mode Operations; Aim Mode and Menu Navigation; Saving Images and Videos

CAMERA MODES
1. OFF mode: To turn off the camera.
2. AIM mode: To program camera.
3. ON mode: When movement occurs in the monitoring region, the camera will take pictures or videos automatically according to the previous
programmed setting. After switching the camera to ON position, the motion-indication LED (red) will blink for about 10 seconds. This time interval
is for you to position the camera for automatic surveillance operation.
7
SAVING IMAGES OR VIDEOS
The camera uses a standard SD memory card to save images (in .JPEG format) and videos (in .avi format). SD and SDHC memory cards up to a
maximum 32GB capacity are supported.
BATTERIES
High-density and high-performance alkaline or lithium batteries are recommended. Cabela’s recommends using Energizer
®
Lithium AA batteries.
SETTINGS MENU
To view the camera settings menu, press (M) in the AIM mode.
Use or to select the sub-menu, use or to select the dfferent options, then press (OK) to save the setting and the option.
Press (M) to return.
CAMERA OPERATIONS
AIM MODE
Settings Menu: To reach the settings menu, turn camera on to AIM mode. Press the menu button (M). To return to main screen, simply press the
menu button (M) again. Scroll up or down to desired setting and select (OK). Use or to change selection and (OK) when finished.