Caberg PRO SPEAK EVO Assembly

1.
2.
3.
4.
ASSEMBLY
Remove both cheek pads and place the
cables under the rear cushion.
Place the right speaker (R) behind the
cheek pad at the holes using the velcro
on the back of the speaker.
Repeat the operations for the right
speaker (R) to position the left (L).
Snap in the cheek pad’s buttons on both
sides paying attention to not ‘’pinch’’ the
cables’’.

Caberg PRO SPEAK EVO Specifications

General

Brand	Caberg
Model	PRO SPEAK EVO
Category	Motorcycle Accessories
Language	English