Need help?Do you have a question about the Caberg JUST SPEAK EVO and is the answer not in the manual?
General| Bluetooth Version | 5.0 |
|---|---|
| Charging time | Approx. 2 hours |
| Speaker diameter | 40 mm |
| Voice Control | Yes |
| Multi-Device Pairing | Yes |
Step-by-step guide for mounting the headset unit and microphone onto your helmet for optimal use.
Instructions on how to turn on the JUST SPEAK EVO headset, including LED indicators and audio feedback.
Guide on shutting down the JUST SPEAK EVO headset, noting LED changes and audio confirmation sounds.
Details on how to charge the headset using the USB cable, including charging time and LED status indicators.
Methods to check the headset's battery status via LED indicators and voice prompts for battery life.
How to control audio volume for different sources, with independent level settings for each audio output.
Explanation of the order in which the headset handles multiple audio sources and calls, prioritizing functions.
Instructions for pairing the headset with various Bluetooth devices like phones, MP3 players, and GPS units.
Procedures for initiating and terminating intercom conversations with other JUST SPEAK EVO users.
Overview of accessing and navigating the voice configuration menu for device settings and options.
Detailed steps for pairing your mobile phone with the JUST SPEAK EVO headset for calls and music.
Guide on how to connect two mobile phones simultaneously to the JUST SPEAK EVO headset for multipoint functionality.
Instructions for pairing the headset with standalone Bluetooth stereo devices like MP3 players or other audio sources.
Steps to pair the headset with Bluetooth GPS navigation devices for turn-by-turn voice instructions.
How to make, answer, end, and reject calls using the headset, including voice dialing and redialing functions.
Procedure for pairing two JUST SPEAK EVO headsets together to enable intercom communication between riders.
Instructions for playing and controlling stereo music from paired Bluetooth audio devices, including volume and track control.
Simple steps to begin and terminate an intercom conversation with another paired headset user.
How the headset manages incoming mobile calls during an intercom conversation and vice-versa, with priority rules.
Information on what happens when an intercom conversation cannot be established due to a busy signal or other issues.
Details on how the headset attempts to automatically reconnect intercom if the connection is lost due to range.
How to enable or disable the VOX feature for answering calls using voice commands, with factory default settings.
Instructions on disabling voice prompts for menus and indicators, noting which prompts are always active.
Procedure to clear all previously paired Bluetooth devices from the headset's memory for a fresh start.
Guide to restore the headset to its original factory settings, erasing all custom configurations and pairings.
How to exit the voice configuration menu and return the headset to its normal standby mode safely.
To Next Page
