Caberg JUST SPEAK EVO User Manual

JUST SPEAK EVO
11
English
Function
Operations
Music
1 sec.
2 sec.
2 sec.
*
You can use “Voice Dial” and “Redial” only in stand-by mode.
5. PAIRING AND USING THE JUST SPEAK EVO
WITH BLUETOOTH DEVICES
Mobile Phone Pairing
1 Turn on the JUST SPEAK EVO and press and hold the (+) Button for 5
seconds until the LED ashes red and blue alternately and you hear
multiple beeps. You will hear a voice prompt saying “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the
Caberg JSE in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone conrms that pairing has completed and the JUST
SPEAK EVO is ready to use. You will hear a voice prompt from the
JUST SPEAK EVO saying “Your headset is paired”.
5. If the pairing process is not completed within three minutes, the JUST
SPEAK EVO will return to stand-by mode.

Caberg JUST SPEAK EVO Specifications

General

Brand	Caberg
Model	JUST SPEAK EVO
Category	Headsets
Language	English